To apply GoPro adhesive mounts please follow these 3 steps: Apply the mount to a smooth, and fully cleaned surface. A textured surface or any imperfections to a smooth surface can keep the adhesive from making a strong bond. Firmly press the mount into place ensuring full contact over the entire surface area. Be sure to apply the mount at room temp, and also allow at least 24 hours for the mount to properly adhere to the surface. To remove the adhesive mounts, you can use a hairdryer or heat gun...
Read More »
The white rubber part is a locking plug that can be inserted in between the arm ends of the quick release buckle. Having the rubber plug inserted prevents any accidental release of the quick release buckle, and also tightens up the fit. The looped end of the plug can be attached to the thumbscrew to keep it secure when not locked into place. If you do not have a quick-release anti-vibration locking plug, you can get one by purchasing the Grab Bag of Mounts. Quick-release anti-vibration locking plug inserted between the arms of the...
Read More »
Here are instructions to swap out your housing doors on your camera's polycarbonate housing: 1. Open the backdoor of the housing so that it is hanging downwards as much as possible. 2. Pull downwards on the backdoor until it snaps free from the hinge. 3. Line up replacement backdoor into the hinge opening. 4. Push upwards on the backdoor until it clicks into place.
Check out the below Suction Cup Mount tutorial videos for complete mounting instructions. There are two tutorials here - the first is for the new Suction Cup Mount, and the second is for the old Suction Cup Mount. You can tell the difference between the old and new Suction Cup Mounts by how you lock the them in place. With the new mount, you rotate the lever down so that it's in a horizontal position to lock it in place. The old mount requires you to rotate the lever up so...
Read More »
Check out the below Handlebar Seatpost Mount tutorial video for complete mounting instructions.
To mount the suction cup: Apply the mount to a clean, smooth, and flat surface. Any imperfections to the surface such as stickers or too much curve can cause a leak to the suction. Press the mount into place by pushing on the central knob marked 'PRESS'. Pull up on the locking lever to secure it into place. To remove the suction cup: Push the locking lever downwards to the unlocked position. Pull up on the rubber tab coming off the side of the suction cup to release the suction.
Check out this tutorial video on how to use the HERO3 and HERO3+ Wrist Housing.
Check out the below Roll Bar Mount tutorial video for complete mounting instructions.
We do not sell extra adhesive 3M tape individually, but you can do an online search for the adhesive 3M part number to see if you can locate a retailer with the part. The part is the 2.5 mm Double Sided Tape and the 3M part number is 3M 4991 VHB.
If you are interested in viewing any of our GoPro tutorial videos, you can check them out in the our GoPro Tutorial Playlist below. We have several kind of videos to check out including: Videos explaining new products and key new product features. Videos describing various accessories such as mounts or housings. GoPro Athlete Tips & Tricks. We also have some GoPro Support Tips & Tricks Video Tutorials which are not available on our YouTube channel. Video Tutorial - Formatting your SD Card from your GoPro Camera’s Settings Menu Video Tutorial...
Read More »