HERO3/3+ The Continuous Photo mode is not supported by the Wi-Fi remote. When you press and hold the shutter button on the remote, it does not record any photos. You can press and immediately release the shutter button, but it will take one photo. If you want to use Continuous Photo mode you must use the shutter button on the camera. HERO4 Wi-Fi Remote (Original) Continuous Photo and Photo-in-Video modes are not supported by the original Wi-Fi Remote. Continuous Photo: When using the original Wi-Fi Remote; if you press and hold...
Read More »
It should take about 3-5 seconds for the camera to power on once the power button is pressed on the Wi-Fi Remote. If the camera does not power on, check for the following: Make sure that the WiFi BacPac and remote are paired, and that a connection is recognized. Make sure that the camera, Wi-Fi BacPac, and Remote batteries are fully charged. Remember that you need to charge the Wi-Fi BacPac by connecting it to a computer, USB charger, or auto charger directly. It can't be charged through the camera. If...
Read More »
The Lux ratings for the HERO3 and HERO3+ cameras are not something that we have available. We feel that the Lux rating does not provide an accurate picture of the light sensitivity capabilities of the camera, since this is only a rating for the camera sensor, and does not take into account the actual processing of the image by the camera. The best thing you can do to get a better idea of the camera's low-light performance is to take a look at our customers' videos on websites like Youtube or...
Read More »
For HERO3 camera users, make sure that you have updated to the latest camera software version. The latest update reduces interference from constant noises. There are times when certain external electrical interference or audio frequencies will interfere with the audio recording of the camera, and cause a background static. This static should only be appearing in your video if it is being exposed to the interference or frequency. For example, if in a car, you should not have the static if the car is switched off. Electrical systems vary from car...
Read More »
You cannot use multiple outputs such as HDMI and LCD Touch BacPac at the same time. Basically only one kind of output (HDMI/LCD Touch BacPac/Composite/Wifi streaming) can be shown at any time. With the HERO4 Silver's built-in LCD Touch screen, the image will disappear when outputting video through a different port or source.
Yes, GoPro cameras do check for an audio bit in theExtended Display Identification Data.
Auto Gain Control makes far-field sound and sound when the camera is inside waterproof housing, usable. The range of gain is 0-40 dB.
The HERO3+ battery is a rechargeable lithium-ion battery and is rated at 1180 mAH, 3.7V, and 4366mWh.
We do not have any official extreme temperature ratings for the camera. In colder temperatures the main concern is reduced battery life. The camera does generate heat during operation to help keep the battery pack from getting too cold and therefore helps to minimize the reduction in run times. The camera may shut down if the internal temperature reaches 82° Celsius (180° Fahrenheit).
What is the reserved power bias for external mics?The reserved power bias for external mics is 3.3v. What's the impedance of the external mic?GoPro mic input impedance is 2.2 kOhms, any mic that has impedance that's close to 2.2 kOhms should be OK. Is the external mic connection balanced or unbalanced?Unbalanced