In order to use the Dual HERO System there are a few requirements that must be met: To use the Dual HERO System Both HERO3+ Black Edition cameras updated to software version 2.0. The HERO3+ Black Edition is the only camera model that is supported by the Dual HERO System. The Dual HERO System BacPac version 1.17. To use the GoPro App with the Dual HERO System GoPro App 2.3 installed on a supported mobile device. To use GoPro Studio with the Dual HERO System GoPro Studio Mac: (184.108.40.206). GoPro Studio...
Read More »
From the center of the lenses, the two cameras are approximately 33.5mm apart.
You can capture time-lapse photos and record video at the same time when using Dual HERO Mode. Dual Hero Mode enables the user to capture video from the master camera while separately recording full 12mp time-lapse from the slave camera. Both cameras will display their individual status screens for the respective mode that they are shooting in (video for master and time-lapse for slave).
This is a normal, designed feature to eliminate the risk loosing desired footage. You can’t delete file or format the SD card from the App. The trash can and formatting options will no longer be available in the App when connected to a Dual HERO System.
This is normal. The fastest interval for capturing Time-Lapse photos with the Dual HERO System is 2 seconds.
With the Dual HERO System, each camera will take a burst of 30 photos in 1 second. After importing, the images will not be automatically synced for 3D. You can manually pair the two burst .jpg files when in Import window of GoPro Studio, then once they are converted GoPro Studio will add the 3D convergence for the 3D look.
GoPro 3D supports both Active and Passive 3D displays. When exporting from GoPro Studio the customer should select the side-by-side option for YouTube 3D. The respective TV will know how to overlay the images to create a 3D video. Active Display Active Shutter TVs use electronic shutter glasses that are synchronized with your TV to only let each eye see one alternating image (left and right) at a time. The left and right images flash so quickly that the human eye is tricked into seeing both left and right images as...
Read More »
File preparation On your desktop, please create a new folder where you plan to save your 3D video and photos, converted files, and project file. Once the folder is created, plug the USB cable into the mini USB port on your Dual HERO BacPac (with the two cameras connected) and connect the other end to your computer. If the two cameras are initially off, they will display two solid red lights indicating a charge. Press the Mode Button on the Master camera and it will prompt both cameras to mount on...
Read More »
If you have a housing that does not have an exposed slot on the hinge of the backdoor, then there is an alternate tethering procedure that you can use. Please follow these steps: Loop the tether around one mounting finger of the camera housing. Fix the housing to the quick-release with thumbscrew. Loop the tether through the adhesive anchor. This applies to the Blackout Housing. Here is an image showing how it appears when the tether is attached properly:
The Dual HERO System is approved at the same underwater rating as the Dive Housing, down to 197ft/60meters.