This article describes the process to update your camera's Wi-Fi Name and Password from your mobile device.  If you can't remember what your Wi-Fi credentials are you can use our website based flow to manually update your Wi-Fi Password:  GoPro Product Updates Page.  Once at this page, just click the Start Now button to begin.  

With App v2.2 it is required to change the camera's Wi-Fi Name and Password the first time it is used.  You will be presented with a screen to do this the first time you use the app.    Note: You cannot choose the same "goprohero" default password.

If you want to change your camera's Wi-Fi Name or Password again after the initial setup, you can follow the procedure appropriate to your device:

iOS Instructions 

Step 1:  After connecting to the camera, press the wrench icon to open the Settings menu.

Step 2:  In Settings, locate the Wi-Fi Network section.  Press Name Name to open this setting.

Step 3:  You now have the option to change the Wi-Fi network Name or Password.  Once complete, click Apply Changes.

Step 4:  Select "Go for it!"

Step 5:  The change is now complete.  You just need to go back to your device's Wi-Fi setting and reconnect.  

Step 1 Step 2 Step 3

 

Step 4 Step 5  

 

Android Instructions

Step 1:  After connecting to the camera, press the wrench icon to open the Settings menu.

Step 2:  In Settings, locate the Wi-Fi Network section.  Press Name or Version to open this setting.

Step 3:  You now have the option to change the Wi-Fi Name or Password.  Once complete, click Apply Changes.  You will receive a temporary message on the screen that states: "Wi-Fi configuration updated".

Step 1 Step 2 Step 3

 

Windows Phone Instructions

Step 1: Select the Settings button. The Settings button is the three dots in the lower right hand corner.
Step 2:
Select "Settings".
Step 3:
Scroll down to the Wi-Fi Settings and tap "change name and password".
Step 4:
Create new network name and password.
Icon
*** Both the network name and password need to be at least 8 characters ***
Select the check mark to apply changes.
Step 5:
Reconnect to the camera's new Wi-Fi network.
Step 6:
Confirm that you are connected successfully.

 

Step 1 Step 2 Step 3
Step 4 Step 5 Step 6